A specially modified draft doorsweep to block sound from coming under the door bottom.
Our soundproofing seal is a metal strip and rubber loop, with sealed ends for added performance in creating a dead air space within the loop. You’ll also receive the screws to mount it to your door. Depending on if it’s metal, you can want to drill pilot holes, if wood you won’t.
Regularly, only a screwdriver and a couple of minutes is needed to install this very much needed attachment to block sound from coming from underneath your door.
Some more notes about our Soundproofing Door Sweep: (The part that are meant to seal the door bottom against sound and that fits on the edge of the bottom of the door). Since our doorsweep only seals up to a 3/4″ gap, it’ll only be partially effective if more than a 1/4″ gap is left. In that case, a transom seal will have to be used from the hardware store that fits on the floor across the bottom of the doorway. Use this kind in case you have a huge gap. Try to get one with a rubber flap. (Mechanical ones are expensive and will eventually fail).
A wood strip may also be used to extend the bottom of such “Cut Short” doors. We show you how to do it: (See illustration)
Custom cut door sweep up to 60″ (Advise Your Door Width).
Great for noise reduction: Help Fulfill Your Doors Full Soundproofing Potential.
SOUNDPROOFING: BLOCKS SOUND & DRAFTS FROM COMING UNDER THE DOOR
WON’T WEAR OUT LIKE MECHANICAL OR FLIMSEY DOORSWEEPS
Keeps out Critters, too !